Allen Bradley PLC Training

Allen Bradley PLC is one of the widely preferred PLC programming software in the industry. This course will help even beginners with no real experience to learn PLC programming.
In this course you’ll learn to

• Enable RSLinx Driver software
• Enable IO Configuration to make sure RX Logix is attached with PLC and Analog card
• Difference between Examine if Open Input instruction and Examine if Close Input instruction
• Program a basic PLC circuit
• Understand Input and Output wiring on Allen Bradley Micrologix 1200 PLC for a 3-Wire Control Unit
• Understand the Open Loop control of a Forward Reverse Motor Control circuit
• Learn the Closed Loop control of a Forward Reverse Motor control unit
• Use holding contacts of Forward Reverse started to find whether contactors have pulled in or overload has occurred
• Understand the 3 common mistakes in PLC projects
• Write PLC program to control Forward/Reverse contactor
• Diagnose the faulty components in Forward/Reverse contactor
• Implement On-Delay & Off Delay timers through Ladder logic PLC program
• Understand timers On-Delay Timer (TON), Off-Delay Timer (TOFF), and On-Delay Retentive Timer (RTO)
• Write PLC program for CTU Count Up and CTD Count down
• Use CTU and CTD